Saw Blade

Approx. Rs 1,050 / PieceGet Latest Price

Product BrochureProduct Details:

We offer our clients an exclusive range of AMADA Bimetal Band Saw Blade.

Price Range: Rs. 950-18000 per piece.

Patented Varying Tooth Height and Set M-71 Blade

With its special alloying technology, Magnum Hi Lo achieves HRC70 tooth hardness. It maintains positive cutting action and outlasts other blades in production cutting of large-diameter, work hardening steels and nickel-base super alloys with tensile strength of up to 164,000 psi.

 

Features

• 15 degree positive rake angle
• Hardness of HRC70
• Hi-Lo tooth height
• Patented M-71 high speed edge

Advantages

• High heat resistance
• High wear resistance
• Higher tooth hardness than M-42 bi-metal blade
• Reduced cutting resistance

Benefits

• Faster cutting on difficult to cut material
• Faster cutting on large diameter material
• Increased accuracy
• Long life on difficult to cut material

 

Approx. Rs 4,000 / PieceGet Latest Price

Product BrochureProduct Details:

HSS Saw Blade is the standard product used for cutting alloys and common steel < 550 Mpa. All the blades are made in super high-speed steel with a high tungsten and molybdenum content.

These elements of composition ensure that, after heat treatment, an extremely high hardness and suitable tenacity is achieved.

The right tungsten percentage is essential to create the correct quantity of very hard wear-resistant carbides in order to improve the tool life under high temperatures.
The tungsten increases the mechanical endurance of the tool, improving the cutting performance and preventing the austenitic grain enlargement. The tungsten is also essential to guarantee the formation of a fine martensitic structure, and increases the tool tenacity, maintaining a high mechanical resistance.

Vanadium is the element that forms the hardest, wear-resistant carbides amongst all other alloys.

Approx. Rs 1,000 / PieceGet Latest Price

Product Details:

HSS/DMo5 – AISI M2 – DIN 1.3343

High speed steel with tungsten-molybdenum

These elements contain high mechanical characteristics maintaining an excellent toughness.

Molybdenum (Mo), present in 5%, reduces notably the brittleness, favors the formation of a very fine martensitic grain, increases the limit of fatigue and consequently the mechanical resistance, obtaining an improvement of the cutting characteristics.

Tungsten (W), present in 6,4%, produces hard carbides; it contributes to improve the blade toughness preventing the grain growth. It increases the tensile strength and above all the wear resistance to the high working temperatures, improving cutting performances. Vanadium is also present (V) in 1,9%, which makes the grain thinner allowing the formation of hard carbides that improve the wear resistance.

HSS/Co5% – AISI M35 – DIN 1.3243
High speed steel with Tungsten-Molybdenum and CobaltDifferent from DMo5 due to higher cobalt presence (5%).Cobalt (Co) is an element that reduces the grain growth at high temperatures, so the presence of this element gives to the steel a high seal cutting and hardness.This steel grade is fundamental when they have to cut materials such as stainless steel or with high mechanical resistance, that generate high temperatures at the contact point.


Steam oxide treatment This is a controlled oxidation on the blade that makes a layer of iron oxide which increases the self-lubricating capacity and the antifriction of the saw blade giving the following advantages:

• Increased ability to retain the coolant and therefore greater heat dissipation during the cutting.
• High resistance the glue, thus reducing the possibility of seizure.
• Reduction of friction coefficients with increasing of the performances.
• Recommended blade on manual cut-off machine.

PVD System Our saw blades can be supplied bright finish or steam oxide treated or P.V.D. coated. PVD system covers high speed steel blades without altering their structural characteristics, because the coating process is made at lower temperatures than the one used during tempering. Normally the deposited layer is between 2 and 5 microns, important in this phase of coating is the thermal expansion coefficient, the thermal conductibility, the hardness, the  thermodynamic stability to elevated temperatures; because from these elements depend the final result.

Coating Features

• surface hardness increase
• friction reduction and reduction of thermal conductibility
• reduction of working time/machine stops
• reduction of the formation of the edge of amount carried over
• limitation of corrosion and oxidation phenomenons

Approx. Rs 1,000 / PieceGet Latest Price

Product Details:

Our company has set benchmark in offering Circular Saw Blade.

Price Range: Rs. 1000-18000 per piece.

Approx. Rs 7,000 / PieceGet Latest Price

Product Details:

While focusing on varied demands of many industries, we have been engaged in providing specifically developed Carbide Band Saw Blade.

Other Details:

• Durable construction
• Smooth finish
• Tougher and more wear resistant

Approx. Rs 1,250 / PieceGet Latest Price

Product Details:

We are dealing in Meba Bandsaw blades. Call Us for more details. Price will Vary as per specifications required. 

Approx. Rs 1,000 / PieceGet Latest Price

Product Details:

Banking on the skills of our qualified team of professionals, we are involved in providing Amada Circular Saw Blade.

Price Range: Rs. 1350-18000 per piece.